Overview
Watex hydro blasting heat exchanger is a technique for chemical and oil industry , which relies on the energy of water striking a surface to achieve its good cleaning effect.
Abrasives are not necessary in hydroblasting systems. Consequently the problems caused by dust pollution and by the disposal of spent abrasives are eliminated.
Watex highly experienced in cleaning all components, which can help reduce the frequency of cleaning, minimize downtime and maximize plant production.
Watex hydroblasting can descale heat exchangers and associated pipework and tank cleaning as well , and remove fouling to regain full origial surface
Hydro blasting heat exchanger
Hydro blasting works like a a pressure washer that is contained in a housing the size of a large lawnmower. It blasts the surface with a high pressure spinning water stream.
The Ultra High Pressure hydro blasting coating removal unit creates its own negative pressure within the housing. The vacuum assisted housing is where the spinning bar, made up of several nozzles, impacts the coating. Hydro blasting heat exchanger
The water is immediately sucked back into the vacuum system so the surface is not only clean and free of the original asbestos, lead or other coating, but is completely dry.
All debris is removed with a vacuum hose connected to a vacuum box attached to the vacuum loader. The result is an emission free system that leaves a clean, dry surface.
The only waste generated is the coating and minimal residual water which is filtered and can be disposed of safely. Watex uses this process for coatings containing lead, asbestos and other hazardous and non-hazardous materials.
This process can be used on floors, ceilings, walls, stacks, ships, runways an most any accessible surface.
Hydro blasting heat exchanger with high pressure water cleaning can be the best option for you maintenace .
Many parts of the hydro blasting heat exchanger
Main part : a flexible lance or twin lances, safe for the operator, and semi-automated to reduce operator fatigue.
Bundle Blaster: a fully-automated tube side cleaning system.Hydro blasting heat exchanger
Watex lance: more powerful with a rigid lance ideal for hard or bad blockages, and no direct operator contact with lance.
When preparing surfaces for inspection or new coatings, hydroblasting offers many advantages over traditional shot and grit blasting (such as no secondary damage, contamination or profiling), and is quicker, safer, cleaner and more flexible” into the first section, Cleaning and surface preparation.
Cold cleaning operations are vital in all industries:Removing risks associated with hot work activities in and around live working plant.
Watex own and operate an extensive fleet of jetting units and compatible specialist accessories covering all aspects of hydroblasting
