High pressure blasting machine High pressure blasting machine

High pressure blasting machine

High pressure blasting machine is typically done through an opening called a cleanout, which is an accessible opening present in every plumbing system and designed to allow plumbers to easily "clean out" debris and other clogs. High pressure water blasting machne consists of a large tank of water, a special high-pressure hose, a special high-strength nozzle, and a cleaning machine with pump unit which pressurizes the water in the hose so that it can spray out of the nozzle at a pressurized rate of up to 40000 psi and a flow rate of 56L/min

Watex high pressure water blasting machine can be widely used for remove the blockage from the tube pipe with high flow rate up to 500L/min with 400 bar and remove the paint rust in a high efficiency with high pressure up to 3000 bar and combining rotating cleaning head to remove the material from the surface in a quick speed ,it also can be used to remove the road marking removal and rubber in the airport .

Overview

Watex high pressure blasting machine is engineered to outperform and outlast any other cleaning system. Combing with high performance pump unit can achieve a high efficiency washing .

Available as a skid or trailer unit. Watex high pressure blasting machine offer a host of features to provide contractors with enhanced performance. superior durability, and unsurpassed operating efficiency.

What happens when Watex takes the toughest high pressure jetting machine in the industry and improves it from end to end?

One of the most notable changes is the special water tank and filter system. This integrated design helps extend system life, while larger filters help extend on-site operating time.

We invite you to explore all the enhancements and operating features of the Watex D-Stream.This pump, with its quick-change, in-line fluid end design. has fewer parts for increased operating efficiency and simpler maintenance.

All operating controls, including the pressure compensating by-pass valve and pressure gauge with snubber. are mounted on a separate accessory manifold, which provides additional protection for these important components.

High pressure blasting machine pump unit

  • Swing-Down manifold for full component access 
  •  Convert to various pressures in the field with minimal downtime
  •  Engine driven charge pump to ensure the fluid end receives water at the correct pressure, regardless of the supply conditions.

High pressure blasting machine operates pressure from 200bar to 3000 bar, it is ideally suited for a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning.

The sealing water system used prevents leakage, enables an especially high durability of the high-pressure seals and counteracts the ingress of air.

1) pump anti vibration technology

The pump anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.

The one button stabilization technology quickly dampends any pump movement resulting from repositioning the piston. This allows precise positioning of the end hose.

With cycle times of up to 29 per minute (at 12MPa), pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.

High pressure blasting machine
  • By adopting our new swing brake technology, the pump’s overswing amplitude is reduced by 60%
  •  The hydraulic system developed by an international team ensures precise operation and energy conservation
  • Extra reinforcements in the boom, arm, swing platform and undercarriage increase stability and service life
  • Easily accessible service points and a detachable radiator screen are among the features that make scheduled maintenance more convenient

Versatile and easy control panel for high pressure blasting machine

High pressure blasting machine control system ensure the high stability of the flow rate and continuous high pressure washer and guarantee high volumetric efficiencies at high pressures in a quick speed as well.

It features for waterproof and dustproof ,the protection level reached to IP 65. Combining pump anti vibration technology ,the pump anti vibration technology reduces vibration during pumping by 50%

1 ) watex fault self diagnostic technology

Continually monitors more than 20 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.

  • Low water lever shutdown system
  • Water temperature shutdown system
  • Different pressure alarm
  • Oil pressure alarm
  • Oil temperature alarm
  • Water pressure switch to keep the pressure of the water into the pump is eligible
High pressure blasting machine

All of the electrical component parts from famous brand

  • All of the electrical components adopts Schneider and some control electrical component parts. purchased from Siemens or the similar high quality brands .
  • The drive motor for the diesel engine from Bosch
High pressure blasting machine

Diesel engine purchased from famous brands, we supply OEM service

Diesel engineer as the same important part like the high pressure blasting machine unit. so we purchased all of our diesel engine purchased from Cummins or same quality brands ,you also can tell us the brand of the diesel you need

  • Cummins engine oil ,every 1000 hours to update
  • Service network all of the world
  • Max rotating speed 1900 rpm
  • Advanced fuel injection technology ,heat efficiency 9.8MJ/KWH
High pressure blasting machine

304 stainless steel water tank in 4mm thickness for high pressure blasting machine

If the water tank made by plastic or normal steel will break and rust easy and break the pump easy and increase the rating of the blockage

  • 250 gallon water tank.
  • Triple 200 gpm filters – the first in its class..
  • Water tank with no pressure filter system by Watex design.
  • Equipped with low water shutdown system and high temperature stop system.
  • Italy mechanical floating valve can eliminate the water hammer effectively
  • Allows for water to de-aerate before entering the pump, extending the life of the parts.
  • Low water level switch to prevent cavitation from water supply problems
High pressure blasting machine

High performance filters for high pressure blasting machine

  • Three stage filters
  • 1μ standard
  • 304 stainless steel casting cover bear high pressure
High pressure blasting machine

Smart fluid end conversion for high pressure water blasting machine

  • Pump head conversion can change from lower pressure to it’s max pressure within 2 mins
  • Whole of the fluid end body made in USA
  • All of the HP seal kits made in USA
High pressure blasting machine

Max strongest chssis for high pressure blasting machine guarantee long lifespan

  • Dural independent frame system ,diesel and pump mounted on a separate plate
  • Design specially for surface treatment ,easy to transport and hoist
  • The plate has tool box can keep some tools and accessories easy and safe
  • Galvanized processing to meet the long term anticorrosion requirement
High pressure blasting machine

Hydraulic reel collection system without compromise as option

  • Torsion accessory can improve the working environment and increase the working efficiency and extend the lifetime of the high pressure tube
  • All of the high pressure tube /line made in Sweden or USA , combining the hydraulic system it can collect the long soft tube in a good situation
  • And maximize the lifetime of the tube ,expecially for the sewer and drain cleaning which need long length tube
High pressure blasting machine

Application washing industry with high pressure blasting machine

High pressure blasting machine is a method by which a high pressure stream of water from 600bar to 2800bar used to remove old paint, rust. Airfield rubber.Road marking removal. chemicals, or other heavy build up without causing damage to the surface below it.

This method is perfect for internal and external surfaces because the spray gun operator is able to access those “hard to reach” areas .

Besides, due to its strong water spray, the user can keep a safe distance from the surface being cleaned.

One of the major differences between water blasting and other cleaning abrasives is the ability to contain, capture. filter and reuse the water. This eliminates waste water and contaminants after the cleaning.

Decoating of a wide variety of materials and surfaces

High pressure water jetting technology from Watex form the ideal basis for gentle decoating of a wide variety of substrates. Many years of experience in all areas of high pressure technology flow into the design of suitable tool. And the correct interaction of water pressure. quantity and working angle ensure perfect results.

Decoring for highest quality requirements for the casting parts

Decoring products ensures maximum cleanliness and quality. Remove residues thoroughly, even on parts that are difficult to access.

Derusting to protect against rust formation

Derusting with high pressure water is a process that is used whenever components and workpieces need to be protected against rust formation.

Descaling to remove impurities from iron oxide

The descaling of steel has a decisive influence on the quality of the end product. It is therefore of enormous importance to control the process reliably and reproducibly.

  • High pressure water jet cleaner2022-9-5

    High pressure water jet cleaner adopts high pressure water pass through the small hole or orifice of the jet nozzle.

  • Hydro demolition machine2022-9-8

    Our range of ultra high pressure water blasting is ideally suited to hydro demolition machine applications. This, coupled with our range of hydrodemolition accessories, ensures we can supply you with the complete package.

  • Water jet rust removal2022-9-6

    There are many ways you can remove rust from metal objects. Water jet rust removal is quite simple and quick, and can save you a lot of time.

  • UHP water cleaning machine2022-9-7

    UHP water cleaning machine uses higher water pressure from 1,000 bar to 3,000 bar or higher . Which requires a special high pressure water pump and hydraulic and control systems.

  • Water jet blasting equipment2022-9-7

    Water jet blasting equipment has been around for many years for a number of cleaning applications. The use of high pressure water for cleaning dates back to the mining & checmical or oil industry . Today waterjet blasting equipment will mainly used for cleaning all of the industries .

  • Waterjet cleaning machine2022-9-1

    Waterjet Cleaning Machine is super highly efficient for surface cleaning and pipe washing and coorinate with robot arm can achieve 3D cleaning. In order to attain perfect cleaning, we can also use special equipment .The manually operated high-pressure water jet cleaning is used in situations where the use of the automated process is not feasible or not economical.

  • What is Waterblasting ?2022-11-22

    Waterblasting is a form of high pressure water cleaning […]

  • Watex will show how quality changes the world power at China CME 20212022-9-2

    China CME 2021 will be held at the Shanghai, China. The leading High Pressure Cleaning Machine manufacturer,  Watex will bring 5 units of hot sale machines to the exhibition, including industry water washing machine, waterjet cutting machine, UHP water jetting road marking machine, airfield runway rubber removal machine, robot waterjet.

Send Us Email
Want to ask questions, suggestions or any inquiry ? That shall be greatly appreciated .

Experienced, Knowledgable, Trustworthy

Quick and helpful reply within 24 hours;
Tailored solutions provided for your project;
One-stop purchasing service.

error: Content is protected !!