High pressure cleaner High pressure cleaner

High pressure cleaner

High pressure cleaner with pressure from 600bar -800 bar for cleaning tube pipe and the surface of the road with the flow rate from 25L/min -80L/min ,if you prepare to clean the sewer or drain ,the flow rate more than than 80L/min

High pressure cleaning machine adopts the high pressure more than 800 bar ,if used high pressure water with flow rate 350L/min ,will be widely be used for cleaning drain and sewer and other surface preparation

Overview

The Watex D-stream  high pressure cleaner are engineered to outperform and outlast any other pressure washer. The new stainless water tank and filter system helps extend system life, while larger filters help extend onsite operating time.

Available as a skid or trailer unit, D-Stream diesel high pressure cleaner offer a host of features to provide contractors with enhanced performance, superior durability.

The D-stream units deliver a host of engineered improvements. One of the most notable changes is the special water tank and filter system. This  integrated design helps extend system life, while larger filters help extend on-site operating time.

All operating controls, including the pressure compensating by-pass valve and pressure gauge with snubber, are mounted on a separate accessory manifold, which provides additional protection for these important components.

Powerful performance and undeniable reliability are just two reasons the new D-Stream Series waterblaster is the clear choice for your high-flow applications.

With operating pressures from 300bar to 3000 bar, it is ideally suited for a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning.

The sealing water system used prevents leakage, enables an especially high durability of the high-pressure seals and counteracts the ingress of air.

High pressure cleaner pump unit

Swing-Down manifold for full component access 

Convert to various pressures in the field with minimal downtime

Engine driven charge pump to ensure the fluid end receives water at the correct pressure, regardless of the supply conditions.

With the operating pressure from 200bar to 3000 bar, it is ideally suited for a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning.

The sealing water system used prevents leakage, enables an especially high durability of the high-pressure seals and counteracts the ingress of air.

1)pump anti vibration technology

  • The pump anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.
  • The one button stabilization technology quickly dampends any pump movement resulting from repositioning the piston. This allows precise positioning of the end hose.
  • With cycle times of up to 29 per minute (at 12MPa), pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.
  • By adopting our new swing brake technology, the pump’s overswing amplitude is reduced by 60%
  • The hydraulic system developed by an international team ensures precise operation and energy conservation
  • Extra reinforcements in the boom, arm, swing platform and undercarriage increase stability and service life
  • Easily accessible service points and a detachable radiator screen are among the features that make scheduled maintenance more convenient
High pressure cleaner

Versatile and easy control panel for high pressure cleaner

  • Control system ensure the high stability of the flow rate and continuous high pressure washer and guarantee high volumetric efficiencies at high pressures in a quick speed as well.
  • It features for waterproof and dustproof ,the protection level reached to IP 65. Combining pump anti vibration technology ,the pump anti vibration technology reduces vibration during pumping by 50%

1) Watex fault self diagnostic technology

Continually monitors more than 200 aspects of the system during operation. Faults are displayed on the monitor.

Review of the detected faults can reduce troubleshooting time by 70%.

  • Low water lever shutdown system
  • Water temperature shutdown system
  • Different pressure alarm
  • Oil pressure alarm
  • Oil temperature alarm
  • Water pressure switch to keep the pressure of the water into the pump is eligible
High pressure cleaner

All of electrical components from famous brands for hight pressure cleaner

  • All of the electrical components adopts Schneider and some control electrical component parts purchased from Siemens or the similar high quality brands .
  • The driven for the engine from Bosch
  • High pressure washer electrical carbnet
High pressure cleaner

Diesel engine purchased from high quality brand

Diesel engineer as the same important part like the high pressure pump unit,so we purchased all of our diesel engine purchased from Cummins or same quality brands ,you also can tell us the brand of the diesel you need

  • Cummins engine oil ,every 1000 hours to update
  • Service network all of the world
  • Max rotating speed 1900 rpm
  • Advanced fuel injection technology ,heat efficiency 9.8MJ/KWH
High pressure cleaner

Stainless steel water tank in 4mm thickness for high pressure cleaner

If the water tank made by plastic or normal steel will break and rust easy and break the pump easy and increase the rating of the blockage

  • 250 gallon water tank.
  • Triple 100 gpm filters – the first in its class..
  • Water tank with no pressure filter system by Watex design.
  • Equipped with low water shutdown system and high temperature stop system.
  • Italy mechanical floating valve can eliminate the water hammer effectively
  • Allows for water to de-aerate before entering the pump, extending the life of the parts.
  • Low water level switch to prevent cavitation from water supply problems
High pressure cleaner

High performance fileters for high pressure cleaner machine

  • Three stage filters
  • 1μ standard
  • 304 stainless steel casting cover bear high pressure
High pressure cleaner

Smart fluid end system conversion for high pressure cleaner

  • High pressure washer head conversion can change from lower pressure to it’s max pressure within 2 mins
  • Integrated design with lower spare parts
  • Lower running cost
  • All of the HP kits made in USA
High pressure cleaner

Max strongest frame for high pressure cleaner guarantee long lifespan

  • Dural independent frame system ,diesel and pump mounted on a separate plate
  • Design specially for surface treatment ,easy to transport and hoist
  • The plate has tool box can keep some tools and accessories easy and safe
  • Galvanized processing to meet the long term anticorrosion requirement
High pressure cleaner

Hydraulic reel collection system without compromise as option

  • Torsion accessory can improve the working environment and increase the working efficiency and extend the lifetime of the high pressure tube
  • All of the high pressure tube /line made in Sweden or USA , combining the hydraulic system it can collect the long soft tube in a good situation
  • And maximize the lifetime of the tube ,expecially for the sewer and drain cleaning which need long length tube
High pressure cleaner

Industry cleaning application with high pressure cleaner

High pressure cleaner is a method by which a high pressure washer stream of water from 600bar to 2800bar used to remove old paint, rust, rubber, chemicals. Or other heavy build up without causing damage to the surface below it.

This method is perfect for internal and external surfaces because the spray gun operator is able to access those “hard to reach” areas .

Pipes and tube cleaning

Watex offers a wide range of cleaning systems for pipes and pipe bundles for different diameters and hard contamination. Cleaning of ducts, pipelines, wash water pipes, exhaust pipes.

Removing burrs safely and precisely after the manufacturing process is an ideal field of application for waterjet technology. A perfectly matched system of high pressure washer and water tool ensures precise, reproducible results.

Surface cleaning

Cleaning surfaces is a popular task with water jetting machine. All the better that the powerful solutions from Watex is able to handle this chore. It saving time thanks to their performance and achieving optimal results.

Cleaning of containers, tanks and vessels

Tanks and vessels of all shapes and sizes often require tailored cleaning solutions. We develop solutions to ensure that vessels and tanks are cleaned optimally and that the quality standards in your production process remain unchanged.

Deburring for high precision parts

Removing burrs safely and precisely after the manufacturing process is an ideal field of application for waterjet technology. A perfectly matched system of high-pressure pump and water tool ensures precise, reproducible results.

  • Hydro blasting machine price in the market2022-9-8

    Watex’s hydro blasting machine sell in a competitive price with high configuration and three years warranty . We design the pump unit according to Atex standard and the metal material purchsed from Japan .

  • Hydro demolition2022-9-8

    The impact of concrete breakers and jackhammers is not limited to deteriorated concrete. It can damage rebar and produce vibration that generates microfractures in sound concrete. Not to mention the high noise and lots of dust.But hydro demolition can avoid it .

  • High pressure water blasting equipment2022-9-2

    High pressure water blasting equipment is a technique for cleaning external surfaces. It relies entirely on the sheer force of water from a pressurized source to achieve the desired cleaning effect on the intended surface.

  • Water jet cleaning2022-8-25

    Water jet cleaning, or waterjet cleaning machine is widely used process for the removal of material, coating, or contamination from the surface of material. Watex has experience with all types of water jet cleaning machine and specializes water jet blasting technology .

  • Water blasting rust removal2022-9-4

    Water blasting rust removal or pressure jetting is the use of high-pressure water to remove loose paint,rust,casting parts mould, grime, dust, mud and dirt from surfaces and objects such as buildings, vehicles and concrete surfaces. …

  • What is Waterblasting ?2022-11-22

    Waterblasting is a form of high pressure water cleaning […]

  • Watex partners Idevener to Promote Industrialized high pressure cleaning solution System Together in Spain2022-9-2

    Pressure Washing or Power washing is the use of high pressure water to remove old paint, mold, grime, dust, mud, dirt from surfaces and objects .

  • Water jetting unit2022-9-5

    No matter what heavy industry you are in, high pressure water jetting unit is an efficient, cost-effective and environmentally friendly part of any industrial plant or industrial equipment cleaning toolkit.

Send Us Email
Want to ask questions, suggestions or any inquiry ? That shall be greatly appreciated .

Experienced, Knowledgable, Trustworthy

Quick and helpful reply within 24 hours;
Tailored solutions provided for your project;
One-stop purchasing service.

error: Content is protected !!