High pressure cleaning machine High pressure cleaning machine

High pressure cleaning machine

High pressure cleaning machine is typically done through an opening called a cleanout, which is an accessible opening present in every plumbing system and designed to allow plumbers to easily "clean out" debris and other clogs. water jet blasting machine consists of a large tank of water, a special high-pressure hose, a special high-strength nozzle, and a cleaning machine with pump unit which pressurizes the water in the hose so that it can spray out of the nozzle at a pressurized rate of up to 40000 psi and a flow rate of 56L/min

Watex high pressure cleaning machine can be widely used for remove the blockage from the tube pipe with high flow rate up to 500L/min with 400 bar and remove the paint rust in a high efficiency with high pressure up to 3000 bar and combining rotating cleaning head to remove the material from the surface in a quick speed ,it also can be used to remove the road marking removal and rubber removal in the airport .


High pressure cleaning machine are engineered to outperform and outlast any other units. The new stainless water tank and filter system helps extend system life, while larger filters help extend onsite operating time.
What happens when Watex takes the toughest water blasting system in the industry and improves it from end to end? You get an D-stream duty unit with enhanced performance, superior durability, and unsurpassed operating efficiency.

The D-stream units deliver a host of engineered improvements. One of the most notable changes is the special water tank and filter system. This  integrated design helps extend system life, while larger filters help extend on-site operating time.
The Watex D-Stream Series units are built to the exacting standards that have made Watex equipment the contractor’s choice for over 12 years.

With operating pressures from 300bar to 3000 bar, it is ideally suited for a wide variety of cleaning work. in the chemical industry, oil and gas industries as well as in the area of ship cleaning.

The sealing water system used prevents leakage. Enables an especially high durability of the high-pressure seals and counteracts the ingress of air.

High Pressure Water Cleaning Machine Pump Unit

With the operating pressure from 200bar to 3000 bar, it is ideally suited for a wide variety of cleaning work. In the chemical industry, oil and gas industries as well as in the area of ship cleaning and hydro demolition

The sealing water system used prevents leakage. enables an especially high durability of the high-pressure seals and counteracts the ingress of air.

• Swing-Down manifold for full component access
• Convert to various pressures in the field with minimal downtime
• Engine driven charge pump to ensure the fluid end receives water at the correct pressure. regardless of the supply conditions.

1)pump anti vibration technology

The pump anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.

The one button stabilization technology quickly dampends any pump movement resulting from repositioning the piston. This allows precise positioning of the end hose.

  • With cycle times of up to 29 per minute (at 12MPa).pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.
  • The hydraulic system developed by an international team ensures precise operation and energy conservation
  • Extra reinforcements in the boom, arm, swing platform and undercarriage increase stability and service life
  • Easily accessible service points and a detachable radiator screen are among the features that make scheduled maintenance more convenient
  • By adopting our new swing brake technology, the pump’s overswing amplitude is reduced by 60%
High pressure cleaning machine

Versatile And Easy Control Panel For High Pressure Cleaning Machine

Control system ensure the high stability of the flow rate and continuous high pressure washer. And guarantee high volumetric efficiencies at high pressures in a quick speed as well

It features for waterproof and dustproof ,the protection level reached to IP 65. Combining pump anti vibration technology ,the pump anti vibration technology reduces vibration during pumping by 50%

1 ) Watex fault self diagnostic technology

Continually monitors more than 20 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.

  • Low water lever shutdown system
  • Water temperature shutdown system
  • Different pressure alarm
  • Oil pressure alarm
  • Oil temperature alarm
  • Water pressure switch to keep the pressure of the water into the pump is eligible
High pressure cleaning machine

All of the electrical component parts purchased from famous brand

  • All of the electrical components adopts Schneider and some control electrical component parts purchased from Siemens or the similar high quality brands
  • The drive motor for the diesel engine is purchased from Bosch
High pressure cleaning machine

Diesel engine purchased from famous brands ,Watex also supply OEM service

  • Diesel engineer as the same important part like the high pressure pump unit,so we purchased all of
  • Diesel engine purchased from Cummins or same quality brands ,you also can tell us the brand of the diesel you need
High pressure cleaning machine

304 stainless steel water tank in 4mm thickness guarantee the lifespan for the pump

Stainless steel Water tank with two filter systems protect the high pressure pump and get the water out from tap into the water tank.

During the water jetting situation there are a high pressure water splash and spray around the place where put on the machine. if the water tank made by plastic or normal steel will break and rust easy

  • 250 gallon water tank.
  • Triple 200 gpm filters – the first in its class..
  • Water tank with no pressure filter system by Watex design.
  • Equipped with low water shutdown system and high temperature stop system.
  • Italy mechanical floating valve can eliminate the water hammer effectively
  • Allows for water to de-aerate before entering the pump, extending the life of the parts.
  • Low water level switch to prevent cavitation from water supply problems
High pressure cleaning machine

Maximum performance filter for high pressure cleaning machine

  • Three stage filters
  • 1μ standard
  • 304 stainless steel casting cover bear high pressure
  • The cover made by laser welding
High pressure cleaning machine

Smart fluid end conversion for high pressure cleaning machine

  • Pump head conversion can change from lower pressure to it’s max pressure within 2 mins
  • Whole of the fluid end made in USA
  • All of the HP seal kits made in USA
  • The guague purchased from Wika
High pressure cleaning machine

Max strongest chassis for high pressure cleaning machine guarantee long lifespan

  • Dural independent frame system ,diesel and pump mounted on a separate plate
  • Design specially for surface treatment ,easy to transport and hoist
  • The plate has tool box can keep some tools and accessories easy and safe
  • Galvanized processing to meet the long term anticorrosion requirement
High pressure cleaning machine

Hydraulic reel collection system without compromise as option

  • Torsion accessory can improve the working environment and increase the working efficiency and extend the lifetime of the high pressure tube
  • All of the high pressure tube /line made in Sweden or USA . Combining the hydraulic system it can collect the long soft tube in a good situation
  • And maximize the lifetime of the tube ,expecially for the sewer and drain cleaning which need long length tube
High pressure cleaning machine

Industry cleaning application with high pressure cleaning machine

High pressure cleaning machine is a method by which a high pressure stream of water from 600bar to 2800bar used to remove old paint, rust, rubber of airport , chemicals, or other heavy build up without causing damage to the surface below it.

This method is perfect for internal and external surfaces because the spray gun operator is able to access those “hard to reach” areas .

Pipe and tube cleaning with high pressure cleaning

Besides, due to its strong water spray, the user can keep a safe distance from the surface being cleaned.

One of the major differences between water blasting and other cleaning abrasives is the ability to contain. capture, filter and reuse the water. This eliminates waste water and contaminants after the cleaning.

Pipes and tube cleaning

Watex offers a wide range of cleaning systems for pipes and pipe bundles for different diameters and hard contamination. Cleaning of ducts, pipelines, ash water pipes, exhaust pipes.

Surface cleaning

Cleaning surfaces is a popular task with water jetting machine. All the better that the powerful solutions from Watex is able to handle this chore. saving time thanks to their performance and achieving optimal results.

Cleaning of containers, tanks and vessels

Tanks and vessels of all shapes and sizes often require tailored cleaning solutions. We develop solutions to ensure that vessels and tanks are cleaned optimally and that the quality standards in your production process remain unchanged.

Deburring for high precision parts Removing burrs safely and precisely after the manufacturing process is an ideal field of application for waterjet technology. A perfectly matched system of high-pressure pump and water tool ensures precise, reproducible results.

error: Content is protected !!