High pressure water blaster machine High pressure water blaster machine
water blaster

High pressure water blaster machine

High pressure water blaster machine is an appropriate solution when clogs cannot be removed through traditional snaking, such as in the presence of stubborn roots that have found their way into your sewer lines. Hydro blasting cleaning machine is also required before Pipe Lining because any debris present in the existing pipe may cause the epoxy lining resin to be malformed and / or prevent it from bonding correctly to the existing pipe.

High pressure water blaster can be widely used for remove the blockage from the tube pipe with high flow rate up to 200L/min with 400 bar and remove the paint rust in a high efficiency with high pressure up to 3000 bar and combining rotating cleaning head to remove the material from the surface in a quick speed ,it also can be used to remove the road marking removal and rubber removal in the airport .

Overview


High pressure water blaster machine is fitted with heavy-duty triple ceramic or hard alloy plunger pumps, unload valves and safety burst discs or safety valves.

What happens when Watex takes the toughest water blaster in the industry and improves it from end to end? You get E-stream duty unit with enhanced performance, superior durability, and unsurpassed operating efficiency.

The electric motors are heavy duty, low revising  which results in less wear to the pump and lower maintenance costs. Pressure is fully adjustable, and chemical injectors are fitted to all units.

Watex electric units are designed for maximum reliability and simplicity, resulting in lower maintenance costs, less downtime, and greater productivity.

The E-Stream Series water blaster have been designed to tackle the toughest water blasting applications. Their quick-change, in-line fluid end design has fewer parts for increased operating efficiency and simpler maintenance.  

High performance pump unit for the high pressure water blaster machine

With the operating pressure from 200bar to 3000 bar, it is ideally suited for a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning, road marking removal,airfield rubber removal ,cement jetting from the tube .

The sealing water system used prevents leakage, enables an especially high durability of the high-pressure seals and counteracts the ingress of air.

  • Swing-Down manifold for full component access
  • Convert to various pressures in the field with minimal downtime
  • Engine driven charge pump to ensure the fluid end receives water at the correct pressure, regardless of the supply conditions.
High pressure water blaster machine

1)pump anti vibration technology

  • The pump anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.
  • The one button stabilization technology quickly dampends any pump movement resulting from repositioning the piston. This allows precise positioning of the end hose.
  • With cycle times of up to 29 per minute (at 12MPa), pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.
  • The hydraulic system developed by an international team ensures precise operation and energy conservation
  • Extra reinforcements in the boom, arm, swing platform and undercarriage increase stability and service life
  • Easily accessible service points and a detachable radiator screen are among the features that make scheduled maintenance more convenient
  • By adopting our new swing brake technology, the pump’s overswing amplitude is reduced by 60%

Versatile and easy control panel for high pressure water blaster machine

Control system ensure the high stability of the flow rate and continuous high pressure washer and guarantee high volumetric efficiencies at high pressures in a quick speed as well

It features for waterproof and dustproof ,the protection level reached to IP 65. Combining pump anti vibration technology ,the pump anti vibration technology reduces vibration during pumping by 50%

1 ) watex fault self diagnostic technology

Continually monitors more than 20 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.

  • Low water lever shutdown system
  • Water temperature shutdown system
  • Water pressure switch to keep the pressure of the water into the pump is eligible
  • Flow rate not stable alarm
  • Low pressure lower than inlet water pressure alarm
High pressure water blaster machine

All of the electrical components parts from famous brand

  • All of the electrical components adopts Schneider and some control electrical component parts purchased from Siemens or the similar high quality brands .
  • Diesel drive motor for diesel engine from Bosch
High pressure water blaster machine

Electrical motor purchased from SIEMENS for high pressure water blaster machine

Electrical motor as the same important parts like high pressure pump ,so we purchased all of our electrical motor from Siemens or other same rating brand  ,it has less spare parts with low maintenance ,it has all of the afterservice all of the world.

  • Service network all of the world
  • Max rotating speed 1900 rpm
  • Meet standard IP55
  • Permanent magnet motor to save the electricity
High pressure water blaster machine

Stainless steel water tank in 4mm thickness for water blaster machine

Stainless steel water tank with two filter systems protect the high pressure pump and get the water out from tap into the water tank ,during the water jetting situation there are a high pressure water splash and spray around the place where put on the machine ,if the water tank made by plastic or normal steel will break and rust easy

  • 150 gallon water tank.
  • 200 gpm filters – the first in its class..
  • Water tank with no pressure filter system by Watex design.
  • Equipped with low water shutdown system and high temperature stop system.
  • Italy mechanical floating valve can eliminate the water hammer effectively
  • Allows for water to de-aerate before entering the pump, extending the life of the parts.
  • Low water level switch to prevent cavitation from water supply problems
High pressure water blaster machine

High performance filter system for high pressure water blaster equipment

  • Three stage filters
  • 1μ standard
  • 304 stainless steel casting cover bear high pressure
  • Whole of the cover made by casting guarantee enough ability to bear the pressure
High pressure water blaster machine

Smart fluid end conversion for water blaster system

  • Pump head conversion can change from lower pressure to it’s max pressure within 2 mins
  • Whole of the fluid end made in USA
High pressure water blaster machine

Max strongest frame for water blaster machine guarantee long lifespan

  • Dural independent frame system ,diesel and pump mounted on a separate plate
  • Design specially for surface treatment ,easy to transport and hoist
  • The plate has tool box can keep some tools and accessories easy and safe
  • Galvanized processing to meet the long term anticorrosion requirement
High pressure water blaster machine

Hydraulic reel collection system without compromise as option

  • Torsion accessory can improve the working environment and increase the working efficiency and extend the lifetime of the high pressure tube
  • All of the high pressure tube /line made in Sweden or USA , combining the hydraulic system it can collect the long soft tube in a good situation
  • And maximize the lifetime of the tube ,expecially for the sewer and drain cleaning which need long length tube
High pressure water blaster machine

Industry cleaning application for high pressure water blaster machine

Pressure washer is a method by which a high pressure stream of water from 600bar to 2800bar used to remove old paint, rust, rubber, chemicals, or other heavy build up without causing damage to the surface below it.

This method is perfect for internal and external surfaces because the spray gun operator is able to access those “hard to reach” areas .

Besides, due to its strong water spray, the user can keep a safe distance from the surface being cleaned.

One of the major differences between water blasting and other cleaning abrasives is the ability to contain, capture, filter and reuse the water. This eliminates waste water and contaminants after the cleaning.

Decoating of a wide variety of materials and surfaces

High pressure water jetting technology from Watex form the ideal basis for gentle decoating of a wide variety of substrates. Many years of experience in all areas of high pressure technology flow into the design of suitable tools and the correct interaction of water pressure, quantity and working angle ensure perfect results.

Decoring for highest quality requirements for the casting parts

Decoring products ensures maximum cleanliness and quality. Remove residues thoroughly, even on parts that are difficult to access.

Derusting to protect against rust formation

Derusting with high pressure water is a process that is used whenever components and workpieces need to be protected against rust formation.

Descaling to remove impurities from iron oxide

The descaling of steel has a decisive influence on the quality of the end product. It is therefore of enormous importance to control the process reliably and reproducibly.

  • High pressure water jet cleaner2022-9-5

    High pressure water jet cleaner adopts high pressure water pass through the small hole or orifice of the jet nozzle.

  • Water jet paint removal2022-9-2

    Water jet paint removal offer an effective and environmentally friendly solution here using pressure of up to 3,000 bar.

  • Hydrojet machine2022-9-6

    because of its strong water spray, the user can keep a safe distance from the surface being cleaned. One of the major differences between high pressure water jet cleaning and other cleaning abrasives (such as silica sand, coal or smelter slag, metallic, synthetic, organic nut shells or fruit kernels) is the ability to contain, capture, filter and reuse the water. This eliminates waste water and contaminants after the cleaning. Extremely high pressure jetting systems (2800 bar or greater) are used for concrete cutting.

  • What is the application of the ultra High Pressure Water Jetting Machine2022-9-7

    Ultra High pressure water jetting machine is the preferred method on projects where large amounts of abrasives must be collected and disposed.

  • Heat exchangers high pressure water jetting2022-9-7

    Indudstral heat exchanger cleaning with high pressure water only : Safe and Efficiency .Heat exchangers high pressure water jetting system can meet both requirement .

  • What is the high pressure water blasting for paint rust removal ?2022-9-8

    Watex has access to the largest high & ultra-high pressure water cleaners available , ranging in horsepower from 70 to 1000 HP

  • Waterjet cleaning machine2022-9-1

    Waterjet Cleaning Machine is super highly efficient for surface cleaning and pipe washing and coorinate with robot arm can achieve 3D cleaning. In order to attain perfect cleaning, we can also use special equipment .The manually operated high-pressure water jet cleaning is used in situations where the use of the automated process is not feasible or not economical.

  • Watex partners Idevener to Promote Industrialized high pressure cleaning solution System Together in Spain2022-9-2

    Pressure Washing or Power washing is the use of high pressure water to remove old paint, mold, grime, dust, mud, dirt from surfaces and objects .

Send Us Email
Want to ask questions, suggestions or any inquiry ? That shall be greatly appreciated .

Experienced, Knowledgable, Trustworthy

Quick and helpful reply within 24 hours;
Tailored solutions provided for your project;
One-stop purchasing service.

error: Content is protected !!