Hydro blasting equipment is fitted with heavy-duty triple ceramic or hard alloy plunger pumps, unload valves and safety burst discs or safety valves.
The electric motors are heavy duty, low revising which results in less wear to the pump and lower maintenance costs. Pressure is fully adjustable, and chemical injectors are fitted to all units.
Watex electric units are designed for maximum reliability and simplicity, resulting in lower maintenance costs, less downtime, and greater productivity.
The E-Stream Series water jetting units have been designed to tackle the toughest water jetting applications. Their quick-change, in-line fluid end design has fewer parts for increased operating efficiency and simpler maintenance.
Hydro blasting equipment pump unit
With the operating pressure from 200bar to 3000 bar, it is ideally suited for a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning, road marking removal,airfield rubber removal ,cement jetting from the tube .
The sealing water system used prevents leakage, enables an especially high durability of the high-pressure seals and counteracts the ingress of air.
- Swing-Down manifold for full component access
- Convert to various pressures in the field with minimal downtime
- Engine driven charge pump to ensure the fluid end receives water at the correct pressure, regardless of the supply conditions.
1)pump anti vibation technology
- The pump anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.
- The one button stabilization technology quickly dampends any pump movement resulting from repositioning the piston. This allows precise positioning of the end hose.
- With cycle times of up to 29 per minute (at 12MPa), pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.
- The hydraulic system developed by an international team ensures precise operation and energy conservation
- Extra reinforcements in the boom, arm, swing platform and undercarriage increase stability and service life
- Easily accessible service points and a detachable radiator screen are among the features that make scheduled maintenance more convenient
- By adopting our new swing brake technology, the pump’s overswing amplitude is reduced by 60%
Versatile and easy control panel for hydro blasting equipment
It features for waterproof and dustproof ,the protection level reached to IP 65. Combining pump anti vibration technology ,the pump anti vibration technology reduces vibration during pumping by 50%
1)Watex fault self diagnostic technology
Continually monitors more than 200 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.
• Low water lever shutdown system
• Water temperature shutdown system
• Water pressure switch to keep the pressure of the water into the pump is eligible
• Flow rate not stable alarm
• Low pressure lower than inlet water pressure alarm
All of the electrical components parts from famous brand
- All of the electrical components adopts Schneider and some control electrical component parts purchased from Siemens or the similar high quality brands .
- The drive motor for the diesel engine from Bosch
Electrical motor purchased from SIEMENS for hydro blasting equipment
Electrical motor as the same important parts like high pressure pump ,so we purchased all of our electrical motor from Siemens or other same rating brand ,it has less spare parts with low maintenance ,it has all of the afterservice all of the world.
• Service network all of the world
• Max rotating speed 1900 rpm
• Meet standard IP55
• Permanent magnet motor to save the electricity
304 stainless dteel water tank in 4mm thickness guarantee lifespan for pump unit without rust
Stainless steel Water tank with two filter systems protect the high pressure pump and get the water out from tap into the water tank ,during the water jetting situation there are a high pressure water splash and spray around the place where put on the machine ,if the water tank made by plastic or normal steel will break and rust easy
- 150 gallon water tank.
- 200 gpm filters – the first in its class..
- Water tank with no pressure filter system by Watex design.
- Equipped with low water shutdown system and high temperature stop system.
- Italy mechanical floating valve can eliminate the water hammer effectively
- Allows for water to de-aerate before entering the pump, extending the life of the parts.
- Low water level switch to prevent cavitation from water supply problems
High performance filters for jet cleaner of water blasting equipment
- Three stage filters
- 1μ standard
- 304 stainless steel casting cover bear high pressure
Smart fluid end conversion system for hydro blasting equipment
- Pump head conversion can change from lower pressure to it’s max pressure within 2 mins
- Lower spare parts thanks to the integrated design of the pistion
- All of the HP kits and body made in USA
Max strongest chassis for water jet cleaning system guarantee long lifespan
- Dural independent frame system ,diesel and pump mounted on a separate plate
- Design specially for surface treatment ,easy to transport and hoist
- The plate has tool box can keep some tools and accessories easy and safe
- Galvanized processing to meet the long term anticorrosion requirement
Hydraulic reel collection system without compromise as option
- Torsion accessory can improve the working environment and increase the working efficiency and extend the lifetime of the high pressure tube
- All of the high pressure tube /line made in Sweden or USA , combining the hydraulic system it can collect the long soft tube in a good situation
- And maximize the lifetime of the tube ,expecially for the sewer and drain cleaning which need long length tube
Application cleaning industry with hydro blasting equipment
Pressure washer is a method by which a high pressure stream of water from 600bar to 2800bar used to remove old paint, rust, rubber, chemicals, or other heavy build up without causing damage to the surface below it.
Besides, due to its strong water spray, the user can keep a safe distance from the surface being cleaned.
One of the major differences between water blasting and other cleaning abrasives is the ability to contain, capture, filter and reuse the water. This eliminates waste water and contaminants after the cleaning.
Watex offers a wide range of cleaning systems for pipes and pipe bundles for different diameters and hard contamination. Cleaning of ducts, pipelines, ash water pipes, exhaust pipes.
Cleaning surfaces is a popular task with water jetting machine.All the better that the powerful solutions from Watex is able to handle this chore, saving time thanks to their performance and achieving optimal results.
Cleaning of containers, tanks and vessels
Tanks and vessels of all shapes and sizes often require tailored cleaning solutions. We develop solutions to ensure that vessels and tanks are cleaned optimally and that the quality standards in your production process remain unchanged.
Deburring for high precision parts
Removing burrs safely and precisely after the manufacturing process is an ideal field of application for waterjet technology. A perfectly matched system of high-pressure pump and water tool ensures precise, reproducible results.