Hydro jetting equipment Hydro jetting equipment
hydro jetting machine

Hydro jetting equipment

Hydro jetting equipment is a method by which a high pressure stream of water from 600bar to 2800bar used to remove old paint, rust, rubber, chemicals, or other heavy build up without causing damage to the surface below it. This method is perfect for internal and external surfaces because the spray gun operator is able to access those “hard to reach” areas .Besides, due to its strong water spray, the user can keep a safe distance from the surface being cleaned. One of the major differences between water blasting and other cleaning abrasives is the ability to contain, capture, filter and reuse the water. This eliminates waste water and contaminants after the cleaning. Extremely high pressure washer 2800bar are used for concrete cutting.

Hydro jetting machine is the use of high-pressure water spray to remove loose paint, mold, grime, dust, mud, chewing gum and dirt from surfaces and objects such as buildings, vehicles and concrete surfaces. The volume of a mechanical pressure washer is expressed in gallons or liters per minute, often designed into the pump and not variable.The pressure, expressed in pounds per square inch, pascals, or bar, is designed into the pump but can be varied by adjusting the unloader valve.

Overview

Watex D-stream Hydro jetting equipment engineered to outperform and outlast any other units. The new stainless water tank and filter system helps extend system life.

 Adopts the pressure compensating by-pass valve and pressure gauge with snubber, which provides additional protection for these important components.

With operating pressures from 300bar to 3000 bar, it is ideally suited for a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning.

As an option, all of Watex pumps are fitted with suction valve lifts. This elegant alternative to a bypass valve allows the water to circulate when no pressure in the pump head and the water tool is not actuated.

Hydro jetting equipment water pump unit

  •  Swing-Down manifold for full component access 
  •  Convert to various pressures in the field with minimal downtime
  •  Engine driven charge pump to ensure the fluid end receives water at the correct pressure, regardless of the supply conditions.
  • With the operating pressure from 200bar to 3000 bar, it is ideally suited for a wide variety of cleaning work.
  • The sealing water system used prevents leakage, enables an especially high durability of the high-pressure seals and counteracts the ingress of air.

1)pump anti vibration technology of hydro jetting equipment

The pump anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.

The one button stabilization technology quickly dampen any pump movement resulting from repositioning the piston. This allows precise positioning of the end hose.

Pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%

  •   By adopting our new swing brake technology, the pump’s overswing amplitude is reduced by 60%
  •   Hydraulic system developed by an international team ensures precise operation and energy conservation
  • Extra reinforcements in the boom, arm, swing platform and undercarriage increase stability and service life
  • Easily accessible service points and a detachable radiator screen are among the features that make scheduled maintenance more convenient
Hydro jetting equipment

Versatile and easy control panel

German made control system ensure the high stability of the flow rate and continuous working and guarantee high volumetric efficiencies .

It features for waterproof and dustproof ,the protection level reached to IP 65. Combining pump anti vibration technology, it can reduce vibration during pumping by 50% .

1 ) Watex fault self diagnostic technology

Continually monitors more than 20 aspects of the system during operation. Faults are displayed on the monitor.

  • Low water lever shutdown system
  • Water temperature shutdown system
  • Different pressure alarm
  • Oil pressure alarm
  • Oil temperature alarm
  • Water pressure switch to keep the pressure of the water into the pump is eligible
Hydro jetting equipment

All of the electrical components from famous Brand

  • All of the electrical components adopts Schneider and some control electrical component parts purchased from Siemens or the similar high quality brands .
  • The drive motor for the diesel engine purchased from Bosch
Hydro jetting equipment

Diesel engine purchased from famous brand, Watex also supply OEM service

Diesel engineer as the same important parts like high pressure unit ,so we purchased all of our diesel engine purchased from Cummins or same quality brands

  •  Cummins engine oil ,every 1000 hours to update
  •  Service network all of the world
  •  Max rotating speed 1900 rpm
  •  European ⅢA Emission standard
  • Advanced fuel injection technology ,heat efficiency 9.8MJ/KWH
Hydro jetting equipment

Stainless steel water tank in 4mm thickness for hydro jetting equipment

If the water tank made by plastic or normal steel will break and rust easy and break the pump easy and increase the rating of the blockage

  • 250 gallon water tank.
  • Triple 200 gpm filters – the first in its class..
  • Water tank with no pressure filter system by Watex design.
  • Equipped with low water shutdown system and high temperature stop system.
  • Italy mechanical floating valve can eliminate the water hammer effectively
  • Allows for water to de-aerate before entering the pump, extending the life of the parts.
  • Low water level switch to prevent cavitation from water supply problems
Hydro jetting equipment

High performance filters system for hydro jetting machine

  • Three stage filters
  • 1μ standard
  • 304 stainless steel casting cover bear high pressure
  • The cover made by laser welding
Hydro jetting equipment

Smart fluid end Conversion system for hydrojetting equipment

  • Pump head conversion can change from lower pressure to it’s max pressure within 2 mins
  • Lower spare parts thanks to the integrated design of the piston
  • All of the HP kits made in USA
Hydro jetting equipment

Max strongest chassis for heavy machine gurantee long lifespan

  • Dural independent frame system ,diesel and pump mounted on a separate plate
  • Design specially for surface treatment ,easy to transport and hoist
  • The plate has tool box can keep some tools and accessories easy and safe
  • Galvanized processing to meet the long term anticorrosion requirement
Hydro jetting equipment

Hydraulic reel collection system without compromise as option

  • Torsion accessory can improve the working environment and increase the working efficiency and extend the lifetime of the high pressure tube
  • All of the high pressure tube /line made in Sweden or USA , combining the hydraulic system it can collect the long soft tube in a good situation
  • And maximize the lifetime of the tube ,expecially for the sewer and drain cleaning which need long length tube
Hydro jetting equipment

Industry cleaning application with hydro jetting equipment

At present ,hydro jetting equipment are widely use for sewer and drain cleaning to get away of the blockage .

Jetting rust and paint removal in the industry of ship hull and hydro demolition to keep the steel frame then make the new concrete .

It is more popular in the building industry like bridge widen ,besides ,road marking removal ,it also can be used for rubber removal in the airport …

Pipes and tube cleaning

Watex offers a wide range of cleaning systems for pipes and pipe bundles for different diameters and hard contamination. Cleaning of ducts, pipelines, ash water pipes, exhaust pipes.

Surface cleaning

Cleaning surfaces is a popular task with water jetting machine.All the better that the powerful solutions from Watex is able to handle this chore, saving time thanks to their performance and achieving optimal results.

Cleaning of containers, tanks and vessels

Tanks and vessels of all shapes and sizes often require tailored cleaning solutions. We develop solutions to ensure that vessels and tanks are cleaned optimally and that the quality standards in your production process remain unchanged.

Deburring for high precision parts

Removing burrs safely and precisely after the manufacturing process is an ideal field of application for waterjet technology. A perfectly matched system of high-pressure pump and water tool ensures precise, reproducible results.

  • High pressure water blasting2022-9-3

    High pressure water blasting machine for surface cleaing always more than 2000 bar to 2,800 bar and can achieve pipe cleaning with lower pressure but with big flow rate like 300L/min .

  • Water jetting system2022-9-5

    Water jetting system is the use of high-speed streams of high pressure water to cut through almost all solid materials and to clean various surfaces as well .

  • Water jetting be used for oil and gas industry2022-9-7

    Water jetting be used for oil and gas industry .High pressure water blasting delivers on average at least 1000 bar (15000 psi) with approximate water volumes of 300L/min per minute and has long been a reliable method for oil industry cleaning.

  • Hydro Jetting machine for drain and sewer cleaning2022-9-8

    Jetting machine adopts highly pressurized water to break up and remove grease, sludge,rust old paint ,road marking and even tree roots from sewer drainage pipes. Think of hydro jetting as pressure washing for the inside of your pipes, only more powerful.

  • Hydro blasting heat exchanger2022-9-6

    Watex hydro blasting heat exchanger is a technique for chemical and oil industry , which relies on the energy of water striking a surface to achieve its good cleaning effect.

  • Why hydro jetting ?2022-9-6

    Hydro jetting commonly known as ultra high pressure water to remove the old paint and rust .

  • Industry high pressure washing machine2022-9-6

    Industry high pressure washing machine is a water sprayer that is used to remove dirt, grease, paint & others from surfaces.

  • High pressure cleaning2022-9-6

    High pressure cleaning is the method by which a high pressure stream of water is used for old paint, rust, road marking ,rubber, barnacle,asphalt removal or other heavy buildup without causing damage to the surface below it,it can be used the best way for for surface preparation.

Send Us Email
Want to ask questions, suggestions or any inquiry ? That shall be greatly appreciated .

Experienced, Knowledgable, Trustworthy

Quick and helpful reply within 24 hours;
Tailored solutions provided for your project;
One-stop purchasing service.

error: Content is protected !!