Hydroblasting machine Hydroblasting machine

Hydroblasting machine

Hydroblasting machine is typically done through an opening called a cleanout, which is an accessible opening present in every plumbing system and designed to allow plumbers to easily "clean out" debris and other clogs. water jet blasting machine consists of a large tank of water, a special high-pressure hose, a special high-strength nozzle, and a cleaning machine with pump unit which pressurizes the water in the hose so that it can spray out of the nozzle at a pressurized rate of up to 40000 psi and a flow rate of 56L/min

Hydroblasting equipment can be widely used for remove the blockage from the tube pipe with high flow rate up to 500L/min with 400 bar and remove the paint rust in a high efficiency with high pressure up to 3000 bar and combining rotating cleaning head to remove the material from the surface in a quick speed ,it also can be used to remove the road marking removal and rubber removal in the airport .

Overview

Hydroblasting machine is engineered to outperform and outlast any other cleaning system. Combing with high performance pump unit can achieve a high efficiency washing .

Available as a skid or trailer unit, Watex hydroblasting machine offers a host of features to provide contractors with enhanced performance, superior durability, and unsurpassed operating efficiency.

What happens when Watex takes the toughest jet cleaner in the industry and improves it from end to end?

One of the most notable changes is the special water tank and filter system. This integrated design helps extend system life, while larger filters help extend on-site operating time.

We invite you to explore all the enhancements and operating features of the Watex D-Stream.This pump, with its quick-change, in-line fluid end design, has fewer parts for increased operating efficiency and simpler maintenance.

All operating controls, including the pressure compensating by-pass valve and pressure gauge with snubber, are mounted on a separate accessory manifold, which provides additional protection for these important components.

Hydroblasting machine pump unit

With the operating pressure from 200bar to 3000 bar, it is ideally suited for a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning.

The sealing water system used prevents leakage, enables an especially high durability of the high-pressure seals and counteracts the ingress of air.

  • Swing-Down manifold for full component access
  • Convert to various pressures in the field with minimal downtime
  • Engine driven charge pump to ensure the fluid end receives water at the correct pressure, regardless of the supply conditions.
Hydroblasting machine

1)pump anti vibration technology of hydroblasting machine

  • The pump anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.
  • The one button stabilization technology quickly dampends any pump movement resulting from repositioning the piston. This allows precise positioning of the end hose.
  • With cycle times of up to 29 per minute (at 12MPa), pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%.
  • The hydraulic system developed by an international team ensures precise operation and energy conservation
  • Extra reinforcements in the boom, arm, swing platform and undercarriage increase stability and service life
  • Easily accessible service points and a detachable radiator screen are among the features that make scheduled maintenance more convenient
  • By adopting our new swing brake technology, the pump’s overswing amplitude is reduced by 60%

Versatile and easy control panel for hydroblastig machine

Control system ensure the high stability of the flow rate and continuous hydroblasting machine. And guarantee high volumetric efficiencies at high pressures in a quick speed as well

It features for waterproof and dustproof ,the protection level reached to IP 65. Combining pump anti vibration technology ,the pump anti vibration technology reduces vibration during pumping by 50%

1 ) Watex fault self diagnostic technology

Continually monitors more than 20 aspects of the system during operation. Faults are displayed on the monitor. Review of the detected faults can reduce troubleshooting time by 70%.

  • Low water lever shutdown system
  • Water temperature shutdown system
  • Different pressure alarm
  • Oil pressure alarm for hydroblasting machine
  • Oil temperature alarm
  • Water pressure switch to keep the pressure of the water into the pump is eligible
Hydroblasting machine

All of the electrical component parts from famous brand

  • All of the electrical components adopts Schneider and some control electrical component parts purchased from Siemens or the similar high quality brands .
  • The drive motor for the diesel engine was purchased from Bosch
Hydroblasting machine

Diesel engine purchased from famous brand , Watex also supply OEM service

Diesel engineer as the same important part like the high pressure pump unit. So we purchased all of our diesel engine purchased from Cummins or same quality brands ,you also can tell us the brand of the diesel you need

Hydroblasting machine

304 Stainless Steel Water Tank In 4mm Thickness

Stainless steel Water tank with two filter systems protect the hydroblasting machine and get the water out from tap into the water tank. During the water jetting situation there are a high pressure water splash and spray around the place where put on the machine ,if the water tank made by plastic or normal steel will break and rust easy

  • 250 gallon water tank.
  • Triple 200 gpm filters – the first in its class..
  • Water tank with no pressure filter system by Watex design.
  • Equipped with low water shutdown system and high temperature stop system.
  • Italy mechanical floating valve can eliminate the water hammer effectively
  • Allows for water to de-aerate before entering the pump, extending the life of the parts.
  • Low water level switch to prevent cavitation from water supply problems
Hydroblasting machine

High performance filter system for hydroblasting equipment

  • Three stage filters
  • 1μ standard
  • 304 stainless steel casting cover bear high pressure
  • The cover made by laser welding
Hydroblasting machine

Smart fluid end conversion for hydroblasting machine

  • Pump head conversion can change from lower pressure to it’s max pressure within 2 mins
  • The fluid end made in USA
  • lower spare parts guarantee lower running cost
  • Thanks to the integrated design of the piston guarantee the long lifespan of the spare parts
Hydroblasting machine

Max strongest chassis for hydroblasting equipment guarantee long lifespan of the water jet unit

  • Dural independent frame system ,diesel and pump mounted on a separate plate
  • Design specially for surface treatment ,easy to transport and hoist
  • The plate has tool box can keep some tools and accessories easy and safe
  • Galvanized processing to meet the long term anticorrosion requirement
Hydroblasting machine

Hydraulic collecting system without compromise as option

  • Torsion accessory can improve the working environment and increase the working efficiency .And extend the lifetime of the high pressure tube
  • All of the high pressure tube /line made in Sweden or USA . combining the hydraulic system it can collect the long soft tube in a good situation
  • And maximize the lifetime of the tube ,expecially for the sewer and drain cleaning which need long length tube
Hydroblasting machine

Industry cleaning application with hydroblasting machine

Pressure washer is a method by which a high pressure stream of water from 600bar to 2800bar used to remove old paint, rust .Rubber, chemicals, runway rubber removal or other heavy build up without causing damage to the surface below it.

This method is perfect for internal and external surfaces because the spray gun operator is able to access those “hard to reach” areas .

Besides, due to its strong water spray, the user can keep a safe distance from the surface being cleaned.

One of the major differences between water blasting and other cleaning abrasives is the ability to contain, capture, filter and reuse the water. This eliminates waste water and contaminants after the cleaning.

Paint stripping from different surfaces and paint types

For every surface and every type of paint, from small hand guns to remote-controlled ship cleaning vehicles – all products for your challenges.

Remove concrete, stone, debris and coatings

When renovating and maintaining structures, buildings, monuments and facades. It is not uncommon to be faced with the challenge of having to remove damaged concrete in order to re-shutter these areas in the further course of the work and then pour new concrete.

Rubber removal from roads, runways and landing strips

Reliably removing rubber abrasion and various contaminants from surfaces of any kind is a tricky task. By using water jet solutions from Watex, this task can be completed gently, quickly and thoroughly.

  • Water jetting unit2022-9-5

    No matter what heavy industry you are in, high pressure water jetting unit is an efficient, cost-effective and environmentally friendly part of any industrial plant or industrial equipment cleaning toolkit.

  • Ultra high pressure water blasting2022-9-7

    Ultra high pressure water blasting or UHP hydro jetting, is simply the practice of adopting highly pressurized water to remove a coating or contaminant from the surface of the material.

  • Drilling pipe cleaning machine2022-9-5

    Drilling pipe cleaning machine require regular non-destructive testing to prove their integrity. Water jetting is the preferred method for cleaning prior to inspection. Corrosion, and cement products can be removed in a single pass, even if the pipe is completely blocked.

  • Water blasting machine for ships2022-9-3

    Ultra high pressure will adopts effective cleaning and paint removal with up to 3,000 bar high-pressure water to remove the paint rust for all of the industry .Like water blasting machine for ships are very popular .

  • High pressure water blaster2022-9-1

    High pressure water blasters from 200bar up to 3000bar , utilising the latest waterblasting technology available for industry cleaning .

  • Hydro jetter2022-9-2

    Hydro jetter adopts high pressure water between 5,000 to 40000psi to remove grime, loose paint, mud, mold, dust and other types of stubborn dirt on the surfaces of tanks, buildings, vehicles, streets, bridges, pipes and many more items.

  • Paint hydro blasting2022-9-2

    Paint hydro blasting ? Doesn’t that just sound cool, exciting, and maybe a little dangerous?  Well, that’s what we thought too. It requires serious safety consideration and experience

  • Water jet blasting equipment2022-9-7

    Water jet blasting equipment has been around for many years for a number of cleaning applications. The use of high pressure water for cleaning dates back to the mining & checmical or oil industry . Today waterjet blasting equipment will mainly used for cleaning all of the industries .

Send Us Email
Want to ask questions, suggestions or any inquiry ? That shall be greatly appreciated .

Experienced, Knowledgable, Trustworthy

Quick and helpful reply within 24 hours;
Tailored solutions provided for your project;
One-stop purchasing service.

error: Content is protected !!