Robot waterjet  cutting Robot waterjet  cutting

Robot waterjet cutting

Robot waterjet machine cuttig carpet or automobile interiors of car or bus ,it adopts ultra high pressure water combing with robot arm to achieve the real 3D cutting that normal machine can not finish

Robot waterjet cutting soft material with pure water like the autombile interiors and hard material cutting like metal stone granite composite material cutting through abrasive to achieve the cutting.

Max safe guard system for robot waterjet cutting equipment

During the robot move and cutting in a high speed with high pressure ,the UHP waterjet cutting is unconquerable .

All of Watex robot waterjet has the perfect safety guard system and UHP process protection system .

The invasion of human or material will force the system stop instantly to assure the safety of the human and system together.

Robot waterjet  cutting

Pure water jet cutting head for robotic water cutter

Watex pure water jet cutting head weights only 3.87LBS guarantees high flexibility and make multi head and 3-D application easy .

It can be quipped with both sapphire and diamond orifices .Diamonds provide hundreds of hours of high quality. Consistent cutting with low average cost per hour .

While sapphires typically have shorter lives, lower purchase price, but higher average cost per hour.

Robot waterjet  cutting

Loading and grouping cutting table for working piece for robot waterjet cutting

Normally this system is vertical double positions with open structure . This vacuum absorption system to get the cutting debris away and water go to special design water tank.

Robot waterjet  cutting

Vaccum absorption and garbage cleaning system for robot waterjet cutting

It use SIEMENS motor with Italy pump to get he strong suction to fix the position .

The car interior during the cutting and get debris and water from the loading and groping system.

Robot waterjet  cutting

Control panel system for robot waterjet cutting system

After you get the drawing from Solidwork ,then you can use the USB copy this document into this system .

You can use panel simulation firstly after you feel it is in the right position then change the machine into the auto model then cut what you just simulating .

Robot waterjet  cutting

Robotic arm choose for waterjet cutting machine

Fanuc Robot M serious , Type : Articulated type; Control axis : 6 axis (J1, J2 ,J3, J4, J5, J6) Installation: Floor ,upside-down (wall & angle mount) ;   Reach :3.11m ; Max load capacity at wrist  Maximum 20kg ;  Max load capacity at J3 casing :24kg ; Drive method : Electric servo drive by AC servo motor ; Repeatability ±0.15mm

Robot waterjet  cutting
  • Water jetting be used for oil and gas industry2022-9-7

    Water jetting be used for oil and gas industry .High pressure water blasting delivers on average at least 1000 bar (15000 psi) with approximate water volumes of 300L/min per minute and has long been a reliable method for oil industry cleaning.

  • Ultra high pressure washer2022-9-7

    Ultra High Pressure Washer is the preferred method on projects do not need sand to sand.

  • Water jetting heat exchanger2022-9-7

    Water jetting heat exchanger can jet heat exchanger thoroughly and efficiently. Deposits and other particles can get lodged in the heat exchanger tubing, reducing the efficiency of heat transfer.

  • UHP water cleaning machine2022-9-7

    UHP water cleaning machine uses higher water pressure from 1,000 bar to 3,000 bar or higher . Which requires a special high pressure water pump and hydraulic and control systems.

  • Hydro jetter2022-9-2

    Hydro jetter adopts high pressure water between 5,000 to 40000psi to remove grime, loose paint, mud, mold, dust and other types of stubborn dirt on the surfaces of tanks, buildings, vehicles, streets, bridges, pipes and many more items.

  • Surface preparation2022-9-6

    Surface preparation is ideally suited to general deposit removal and removing coatings and preparing surfaces.

  • High pressure water tank cleaning machine2022-9-3

    Tank and vessel cleaning requires a specific type of equipment, generally known as Cleaning nozzle and ultra high pressure water tank cleaning machine.

  • High pressure water blasting systems2022-9-8

    High pressure water blasting systems have the proper pressure and flow rate with accessories to accommodate all projects that require high pressure hydro blasting. It is the most efficient method of cleaning for a vast number of applications including industrial pipe and rust and painting removing .

Send Us Email
Want to ask questions, suggestions or any inquiry ? That shall be greatly appreciated .

Experienced, Knowledgable, Trustworthy

Quick and helpful reply within 24 hours;
Tailored solutions provided for your project;
One-stop purchasing service.

error: Content is protected !!