Water blasting machine Water blasting machine

Water blasting machine

water blasting machine is an appropriate solution when clogs cannot be removed through traditional snaking, such as in the presence of stubborn roots that have found their way into your sewer lines. Hydro blasting cleaning machine is also required before Pipe Lining because any debris present in the existing pipe may cause the epoxy lining resin to be malformed and / or prevent it from bonding correctly to the existing pipe

water blasting equipment can be widely used for remove the blockage from the tube pipe with high flow rate up to 200L/min with 400 bar and remove the paint rust in a high efficiency with high pressure up to 3000 bar and combining rotating cleaning head to remove the material from the surface in a quick speed ,it also can be used to remove the road marking removal and rubber removal in the airport .mechanical motor grader with German Bosch fuel injection leads to low exhaust emissions

Overview


Water blasting machine is engineered to outperform and outlast any other units. The new stainless water tank and filter system helps extend system life, while larger filters help extend onsite operating time.

Available as a skid or trailer unit, D-Stream diesel water blasting machine offer a host of features to provide contractors with enhanced performance, superior durability, and unsurpassed operating efficiency.  

What happens when Watex takes the toughest water blasting machine in the industry and improves it from end to end? You get an D-stream duty unit with enhanced performance, superior durability, and unsurpassed operating efficiency.

The D-stream units deliver a host of engineered improvements. One of the most notable changes is the special water tank and filter system. This  integrated design helps extend system life, while larger filters help extend on-site operating time.

These trailer mounted units come standard with features like four wheel electronic brakes, full D.O.T. lighting package, and heavy-duty axles.  All operating controls, including the pressure compensating by-pass valve .

With operating pressures from 300bar to 3000 bar, it is ideally suited for a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning. Additionally, all Watex pumps are certified according to Atex .

Water blasting machine pump unit

  • Swing-Down manifold for full component access 
  • Convert to various pressures in the field with minimal downtime
  • Engine driven charge pump to ensure the fluid end receives water at the correct pressure, regardless of the supply conditions.
  • With the operating pressure from 200bar to 3000 bar, it is ideally suited for a wide variety of cleaning work.
  • The sealing water system used prevents leakage, enables an especially high durability of the high-pressure seals and counteracts the ingress of air.

1)pump anti vibration technology of water blasting machine

Water blasting machine anti vibration technology reduces vibration during pumping by 50% allowing less movement and greater control of the end hose.

The one button stabilization technology quickly dampen any pump movement resulting from repositioning the piston. This allows precise positioning of the end hose.

Pump efficiency is increased up to 25% while fuel consumption is decreased by up to 10%

Water blasting machine

2) anti overswing technology

  • By adopting our new swing brake technology, the pump’s overswing amplitude is reduced by 60%
  • The SLSS hydraulic system developed by an international team ensures precise operation and energy conservation
  • Extra reinforcements in the boom, arm, swing platform and undercarriage increase stability and service life
  • Easily accessible service points and a detachable radiator screen are among the features that make scheduled maintenance more convenient

Versatile and easy control panel for waterjet blasting machine

German made control system ensure the high stability of the flow rate and continuous working and guarantee high volumetric efficiencies .

It features for waterproof and dustproof ,the protection level reached to IP 65. Combining pump anti vibration technology, it can reduce vibration during pumping by 50% .

Continually monitors more than 20 aspects of the system during operation. Faults are displayed on the monitor.

  • Low water lever shutdown system
  • Water temperature shutdown system
  • Different pressure alarm
  • Oil pressure alarm
  • Oil temperature alarm
  • Water pressure switch to keep the pressure of the water into the pump is eligible
Water blasting machine

All of the electrical components purchased from famous brands

  • All of the electrical components adopts Schneider and some control electrical component parts purchased from Siemens or the similar high quality brands .
  • The drive motor for the diesel engine from Bosch
Water blasting machine

Diesel engine purchased from famous brands for waterblasting machine

Diesel engineer as the same important parts like high pressure unit ,so we purchased all of our diesel engine purchased from Cummins or same quality brands

  • Cummins engine oil ,every 1000 hours to update
  • Service network all of the world
  • Max rotating speed 1900 rpm
  • European ⅢA Emission standard
  • Advanced fuel injection technology ,heat efficiency 9.8MJ/KWH
Water blasting machine

Stainless steel water tank in 4mm thickness for water blasting equipment

If the water tank made by plastic or normal steel will break and rust easy and break the pump easy and increase the rating of the blockage

  • 250 gallon water tank for water blasting machine
  • Triple 200 gpm filters – the first in its class..
  • Water tank with no pressure filter system by Watex design.
  • Equipped with low water shutdown system and high temperature stop system.
  • Italy mechanical floating valve can eliminate the water hammer effectively
  • Allows for water to de-aerate before entering the pump, extending the life of the parts.
  • Low water level switch to prevent cavitation from water supply problems
Water blasting machine

High performance filter system for water blasting equipment

  • Three stage filters
  • 1μ standard
  • 304 stainless steel casting cover bear high pressure
  • Whole of the cover made by casting and through laser welding guarnatee the lifespan
Water blasting machine

Smart fluid end conversion for water blasting machine

  • Pump head conversion can change from lower pressure to it’s max pressure within 2 mins
  • Whole of the fluid end body made by integrated milling
  • All of the HP kits made in Japan
Water blasting machine

Max strongest chassis for heavy industry cleaning machine guarantee long lifespan

  • Dural independent frame system ,diesel and pump mounted on a separate plate
  • Design specially for surface treatment ,easy to transport and hoist
  • The plate has tool box can keep some tools and accessories easy and safe
  • Galvanized processing to meet the long term anticorrosion requirement
Water blasting machine

Hydrualic reel collection system without compromise as Option

  • Torsion accessory can improve the working environment and increase the working efficiency and extend the lifetime of the high pressure tube
  • All of the high pressure tube /line made in Sweden or USA , combining the hydraulic system it can collect the long soft tube in a good situation
  • And maximize the lifetime of the tube ,expecially for the sewer and drain cleaning which need long length tube
Water blasting machine

Industry cleaning application with water blasting machine

At present ,water blasting machine are widely use for sewer and drain cleaning to get away of the blockage .

Jetting rust and paint removal in the industry of ship hull and hydro demolition to keep the steel frame then make the new concrete .

It is more popular in the building industry like bridge widen ,besides ,road marking removal ,it also can be used for rubber removal in the airport …

Pipes and tube cleaning

Watex offers a wide range of cleaning systems for pipes and pipe bundles for different diameters and hard contamination. Cleaning of ducts, pipelines, ash water pipes, exhaust pipes.

Surface cleaning

Cleaning surfaces is a popular task with water jetting machine.All the better that the powerful solutions from Watex is able to handle this chore, saving time thanks to their performance and achieving optimal results.

Cleaning of containers, tanks and vessels

Tanks and vessels of all shapes and sizes often require tailored cleaning solutions. We develop solutions to ensure that vessels and tanks are cleaned optimally and that the quality standards in your production process remain unchanged.

Deburring for high precision parts

Removing burrs safely and precisely after the manufacturing process is an ideal field of application for waterjet technology. A perfectly matched system of high-pressure pump and water tool ensures precise, reproducible results.

  • Hydro blasting rig platform2022-9-4

    Hydro blasting for rig platform minimizes waste, does not bring any other activities, removes salt and other residues from surfaces . extend the coating’s lifespan and leaving a clean surface and repainting if necessary.

  • What is the high pressure water blasting for paint rust removal ?2022-9-8

    Watex has access to the largest high & ultra-high pressure water cleaners available , ranging in horsepower from 70 to 1000 HP

  • Water blasting concrete2022-9-1

    In order to remove concrete , ultra high pressure water blasting concrete machines with 1,800bar operating pressure can meet you requirement to remove the concrete .

  • Hydro demolition machine2022-9-8

    Our range of ultra high pressure water blasting is ideally suited to hydro demolition machine applications. This, coupled with our range of hydrodemolition accessories, ensures we can supply you with the complete package.

  • Hydro jet cleaning machine2022-9-8

    Hydro jet cleaning machine can be used for lots of industries that rely on the process include the construction industry, metal industry, the craft trades, municipalities, shipyards, the oil and gas industry, forestry .

  • UHP water blasting unit2022-9-5

    UHP water blasting unit

  • Water jetting be used for oil and gas industry2022-9-7

    Water jetting be used for oil and gas industry .High pressure water blasting delivers on average at least 1000 bar (15000 psi) with approximate water volumes of 300L/min per minute and has long been a reliable method for oil industry cleaning.

  • Hydro jetting heat exchanger —Ultra high pressure water can do anything2022-9-4

    No matter what type of heat exchangers or which industries they are being employed in, eventually all of these units will foul,but hydro jetting heat exchanger can be the best solution .

Send Us Email
Want to ask questions, suggestions or any inquiry ? That shall be greatly appreciated .

Experienced, Knowledgable, Trustworthy

Quick and helpful reply within 24 hours;
Tailored solutions provided for your project;
One-stop purchasing service.

error: Content is protected !!