Water blasting machine for ships Water blasting machine for ships

Water blasting machine for ships

Time:2022-9-3 Author:admin

Ultra high pressure will adopts effective cleaning and paint removal with up to 3,000 bar high-pressure water to remove the paint rust for all of the industry .Like water blasting machine for ships are very popular .

Treatment with water at high pressure enables high area performance in a short time and lets surfaces look like new.

The substrate is optimally prepared at the same time. Completely without blasting material.

Surface cleaning and renovation in one step and with minimum disposal costs.
For environmental reasons and due to the high disposal costs of contaminated blasting material, sand blasting is being increasing replaced worldwide by ultrahigh-pressure jet technology.

water blasting machine for ships or blasting produces only very low impact forces. Layers are removed selectively, without attacking the base material.

Damage to structures is also eliminated, just as are jetting material residues.

Neither gases nor slags are produced No chemical or abrasive additives are used in the application, which means that the quantity of material to be disposed of is reduced to a minimum.

Water blasting machine for ships

The result is convincing in all cases: high cleaning quality, high effectiveness even in difficult to reach areas, high cleaning quality and a high degree of protection for user and environment.
Watex high-pressure waterjetting system can do much more than just cleaning ships surface .

The mobile, compact and flexible-use high-pressure systems from Watex are available for the highly varied application areas. These systems achieve high cleaning and surface performances.

Benefits of water blasting machine for ships

  • Portable for mobility.
  • Provides environmentally cleaner process than dry sandblasting.
  • Reduces manpower saving time and money.
  • Offers versatility from pressure cleaning to wet sandblasting.
  • Improves operation of ship saving time, fuel costs and prolongs life of ship.
  • Dependable low maintenance pump operation offers continuous 24 hour cleaning capability.

Operation knowledge for water blasting machine for ships

water blasting machine for ships is done above and below water.  It is a very controllable cleaning process.  The pressure and flow can be adjusted for any cleaning job from removing surface dirt to stripping chipped paint or barnacles.  

Water blasting  is  a  flexible  cleaning system  also.  It  can  be  a  portable,  manual  system  with several  guns  to  accommodate hard-to-get-at  spots  or  a portable,  automatic  system  with  a  specially  designed oscillation  nozzle  arm  to  follow  the whole  contour  of  the ship’s hull.

water blasting machine for ships is part of a truck-mounted, diesel-powered manual system.

The pump delivers more than 45L/min of water to remove the most stubborn attackers of these ship hulls.

Water blasting machine for ships

When paint is removed, a rust inhibitor is used to prevent further rust development until the vessel is repainted.

It has been found that high pressure blasting is much more effective than the old by hand method with brushes and scrapers in removing the rhizoid of weed spores or barnacles.

The old cleaning methods didn’t get at the root of the problem and the growth quickly reappeared.  When the cleaning task is especially stubborn, this cleaning system can be quickly converted to a wet-sandblaster.

Hull cleaning with water blasting assists with the removal of unwanted material and marine fouling from a ship’s belly. It including the buildup of organisms who have attached themselves to the hull such as mussels, barnacles and oyster. When sea plants are allowed to develop on the hull and propeller, the vessel will experience an increase in roughness.

This increased roughness naturally impacts the relationship with fuel consumption, speed and power and the running efficiency of the ship.

Ship hull cleaning is important not only for sea hull also including the marine ship

There are many reasons why we should choose water blasting as the best method .

  • Cleaning the hull with water blasting reduces fuel consumption.
  • The stability of the ship hull can be guaranteed and maximize the safety for the ship
  • Any hull related issues can easily be viewed and repaired
  • Future fouling removal costs are minimized
  • Keep the engine and prevent overheating
  • Extend the lifespan of the new coating
  • Reducing the biofouling and the invasive species

We design a wide range of water blasting machines for ship cleaning. They are primarily used for ship maintenance, platform maintenance, ship deck and ballast tank cleaning , pipe cleaning, removing rust .

Hydro blasting machine for Yachting

Hydro jetting machine for ship or yachting operate according to an adjustable control system. The pressure varies from 800 to 3000 bar.

Water jetting machine was developed and used in ship cleaning long time ago. Actually, high pressure water cleaning and water jetting method is used in very specific fields. Initially, these are industrial sectors requiring operations’ high accuracy and safety.

Whatever request you need to clean, we have a suitable solution for sure. There are two operation ways : Fully automated solution for ship cleaning will be the more better and save the cleaning cost and time – Watex offers water jetting robots, water jetting machine and many accessories.

Apart from removing old coating and rust, high pressure water blasting removes deeply embedded crystallized salt. Under normal production circumstances ,these machines covered  of combined full and spot blasting reducing the consumption of grit close to 95%.

Water blasting machine for ships

Water blasting machine for ships can meet yachting’s very specific rules and standards

In addition to cleaning boat hulls above and below its waterline, it also can be used for the bottom of the ship cleaning through the robot cleaning panel.

Thanks to our many years technology in high pressure water technology .Watex has a complete knowledge of water jetting for a wide range of boat cleaning application. A know-how that we make available to the yachting customer and sea ship as well .

High pressure water jet uses water that is pressurized between 25.000 to 40,000 psi to remove coatings and debris from substrates for repainting or make the protective coating.

There is a high requirement for the operator for the ship or yachting cleaning. Operator is well trained and experience in safety and operation and maintenance of these units.

To clean big inland or sea vessels, ferries, excursion boats, cruise ships. These ships are cleaned inside and outside in the frame of maintenance. Alga and shell layers must be removed to save fuel. A professional surface cleaning is very important for the preparation of paint works. In order to prevent damage to the paint. The old coating or sea plants must be removed from the whole ship. This work is often done by abrasive blasting before , but step by step substituted by hydro jetting .

Effective cleaning and paint removal with 2500 bar high pressure water jetting

Treatment with water at high pressure water blasting enables surface performance look like new.

The substrate is optimally prepared at the same time without any chemical and sand . Surface cleaning and renovation in one step and with minimum disposal costs. Conventional sand blasting methods for cleaning ship hulls are very contaminant and get lots of environmentally issues. For environmental reasons and due to the high disposal costs of contaminated blasting material, sand blasting is being replaced worldwide by ultra high pressure water jetting machine .

Water blasting machine for ships force that layers are removed selectively, without attacking the substance. Damage to structures is eliminated, only blasting the old coating or rust . In contrast to this, sandblasting leaves residues on the treated surface that are not visible to the eye, which result in bad coating.

Neither gas nor slag are produced , no chemical material or sand needed in the application, which means that the types of material to be disposed of are reduced to a minimum. The result will convincing all of the potential buyers with high cleaning quality, high effectiveness even in those sensitive place, hydro jetting are widely accepted.

UHP water jetting machine for rust and old paint removal for the ship

Ultra high pressure water jetting (UHP) runs up to 40,000 psi and is the most effective and environmentally method for removing all old paint and sea plants at the bottom of the ship . It uses water with no abrasive or chemicals making it safer and more cost effective. It can be used on both external and internal areas leaving the steel surface clean and profiled ready for fresh coating.

Water blasting machine for ships is a much cleaner process than sand blasting with pure water and leaves less waste to be disposed of. And keeping disposal costs lower and get a lower risk of contaminating the working area.

Hydro blasting is spark-free so it is the safer method for application in highly flammable industries. Such as fuel tanks, oil refineries and gas storage sites. It is also the preferred choice for marine .

Experienced, Knowledgable, Trustworthy

Quick and helpful reply within 24 hours;
Tailored solutions provided for your project;
One-stop purchasing service.

error: Content is protected !!