Water blasting units Water blasting units

Water blasting units

Time:2022-9-4 Author:admin

Unlike store bought drain cleaners,contain chemicals that can eat away at your pipes. causing more harm than good, water blasting units is chemical-free and environmenatl .

The hydro jetting begins with your plumber performing a detailed inspection of your system to check for damage. If it looks like your pipes and drains can handle it.

The hydro jetting begins with your plumber performing a detailed inspection of your system to check for damage. This level can be adjusted based on the condition of  water blasting units. It can pressurize the water up to 40,000 psi .This makes the process not only great for destroying clog. but also maintain the overall health of your pipes.

Water blasting units will nip these problems in the bud, leading to more consistently clear drains.

Water blasting units

Water blasting unit as the effective way for cleaning blockages

Water blasting units is known as one of the most effective ways to clean out pipe blockages.

The effectiveness of hydro jetting is due to the pressure of the rotating water that forces its way into the pipe.

On the end of the hydro jet is a nozzle that directs water towards the walls of the pipe.

As the hose pushes forward, the back flush of the water draws debris out of the pipe.

This technique is capable of removing the toughest roots and some of the most stubborn blockages to restore proper water flow.

If your plumbing professional does determine that tree roots are the problem. a commercial hydrojetter is the only sure-fire way to rid yourself of the problem.

It’s especially useful in restaurants and similar establishments that accumulate grease, sludge, debris, and mineral deposits in the drain lines. Scheduling regular sewer jetting service keeps your drains clean.

How does water blasting units work ?

Pressure Jetting the line

The cleaning head is advanced along the run paying special attention to issue areas. Typically several passes are made to fully clean away tough blockages such as tree roots and grease.

Quality Inspection
The sewer line is once again inspected with a sewer line video camera to ensure that any buildup or roots have been removed and that the line is clear.

The Breakup and Flushing of deposits blocking your sewer line flow. Water jetting has the power to burst open the toughest blockages

Water blasting units

Cleaning, not just unclogging

Unfortunately, a rotating snake does little other than punch a hole in the clog to restore flow. It doesn’t address the ongoing issues of sludge that are likely to result in a recurrence very soon.

Hydro-Jetting can also be used to remove roots in drains by using specialized cutting tools driven by the water jets.

Water blasting units are ideal for sewer lines, kitchen blocked drains, laundry lines, tubs, showers, lavatory sinks and floor drains

Accurate and consistent cleaning

One of the best things about hydro jetting equipment is the ability to clear underground drain pipes without having to dig up your yard.

The high pressure water stream goes through the water blasting units spinning both water and sand from multiple angles to ensure the drain pipes are clean and clear.

Powerful and efficient for residual removal

Water blasting units is more efficient than many other drain cleaning methods.

Hydro-Jets come in different sizes, so an experienced plumber can determine the appropriate pressure force to remove debris without damaging the pipes.

Water jetting unit with a performance of up to approx. 2500bar to 2800 bar. It is called water blasting unit. the use of such technology is called UHP water jetting .

The aim of the water jetting unit is to remove stubborn dirt or rust paint from surfaces from floors. walls or vehicles or ship hull. Sometimes , hydro jetting unit can be used for separating material from each other.

Removing bacteria of water blasting units

The stream of water is so forceful that it removes not only the grease, soap, and scum build up.

but also any bacteria that settles in your drains from your kitchen or bathroom, resulting in a myriad of problems.

More economical and environmentally safe

A single pipe cleaning with a water blasting units can delay the need for another service to clear blockages longer than a typical procedure with a mechanical snake.

While traditional drain cleaning should be done a minimum of two times a year.

Safe for your pipes with water blasting units

Hydro jetting can clear your pipes of debris safely and effectively, which not only helps with water and waste flow. Water blasting units are widely used by more and more sewer cleaning and drainage cleaning .

Some cleaning situation requires serious cleaning power like water blasting unit. These may include heat exchanger, chiller towers and oil or gas vessel, pipe and sewer cleaning.

With continuous working pressure up to 40,000 psi, we are able to clean many types of substances internally and externally. For example, cleaning heat exchanger, boiler , process line, evaporator, and tanks. Regardless of the build-up material , we will remove the unwanted material, ranging from rust and scale to polymer or paint. Hydro blasting unit is utilized in many different factories, such as paper mill, power plant, refinery factory, and chemical plant.

Water blasting units, also known as hydro blasting unit that is a cleaning machine that uses a very high pressure pump to blast water through a nozzle and focus on the working surface.

This equipment widely used in many processes from hydro blasting concrete to paint removal

Contamination, paint, sediment and other impurities are dissolved on impact with high pressure water jet. No need chemical material or solvent are required. Because the high pressure water can break the chemical dirt without other material as support.

The operator achieves the cleaning that hard to reach place ,and some place is dangerous . only high pressure water jet can do it . The main benefit of the water blasting unit is that UHP cleaning is more cost effective than traditional cleaning method. Due to the short cleaning time and only use pure water.

Water blasting unit for bitumen and road line removal

High pressure water blasting units combining with different nozzles to remove bitumen binder from the pavement surface. High pressure water jetting road line just by adjusting pressures from 1500 bar -2000 bar. choose the right nozzle for the cleaning panel to get the amount of binder aways quickly .

The road line removal with high pressure water. cooperate with a vacuum recovery of the waste and debris, which is integral to the removal process.

Water blasting unit is one of the effectively road line removal used across the road industry. It can remove lines off asphalt with little damage to the substrate by high pressure water only.

High pressure water blasting unit is the preferred tool for lots of projects and infrastructure. Thanks to it’s quick, efficient and environmentally advantages, as it uses no chemicals in the process. Hydro blasting unit can be a safe alternative to grinding machine as it does not create any dust in the process of road line removal.

Removing excess asphalt with water jetting unit

Clumps of asphalt removed from the roadway are visible with hydro blasting in a quick way with vacuum recovery system. It is environmental and friendly .

Water blasting units widely use in many industries

No matter what industry you are in, high pressure water jetting is an efficient, and environmentally friendly part of any industrial plant.

Watex is dedicated to providing the safest and environmental solutions in all industries. We are committing to providing high quality high pressure water blasting unit that are safe, efficient and effective.

Cleaning and maintenance of industrial machinery is necessary. Pipe cleaning is also a difficult job without the right tools and equipment. Some tasks can’t be finished in a quick speed . Our high quality pumps, high quality safe accessories can protect the operator in the front. Our different range of water jet unit can produce a variety of flow with different pressure options, which allow our machine can finish the cleaning requirement with high quality .

Tank and marine coating cleaning with hydro blasting unit

Watex specialize in not only tank insider or outside cleaning but also all other protective marine coating such as antifoul paint and epoxy barrier coating on hulls.

Some tank for oil or gas with a big volume. if let the operator to cleaning with the high pressure cleaning gun , it will take lots of labor cost and very dangerous ,so use the robot cleaning will be the best chose .

40,000 psi high pressure water blasting unit can remove the paint or rust easy. Watex supply variety of tools for ship hull, shaft tube, exhaust trunk, sea chest. UHP water jetting unit has numerous benefits over conventional abrasive blasting. 

During the cleaning process , all of the salt and surface contaminant and marine growth are removed without impregnating them into the metal substrate that would cause pre-mature coating failures as experienced with sand blasting.

Water blasing units remove the existing coating and reveals the existing surface profile.  This allows for an bare metal yacht hull inspections to look for any crack in the hull or welding.

Experienced, Knowledgable, Trustworthy

Quick and helpful reply within 24 hours;
Tailored solutions provided for your project;
One-stop purchasing service.

error: Content is protected !!