Water jetting heat exchanger Water jetting heat exchanger

Water jetting heat exchanger

Time:2022-9-7 Author:admin

Water jetting heat exchanger can jet heat exchanger thoroughly and efficiently. Deposits and other particles can get lodged in the heat exchanger tubing, reducing the efficiency of heat transfer.

Any reduction can result in higher expenditures for the operator. Use Watex water jetting equipment to keep your heat exchanger running at its full efficiency.

Water jetting heat exchanger

Water jetting heat exchanger cleaning system involves a small nozzle placed on the end of either a rigid tube or a flexible hose.

The high-pressure water jet removes scale, rust, residue, and other deposits. The waste is washed away with the water.

Heat exchangers are devices that transfer thermal energy from one substance to the other.

The substances flow through the heat exchanger in the same, contrary or crossed direction.

In the most cases heat exchangers are made of metal. but there are also heat exchangers made of enamel, plastic, glass, silicon carbide, copper, aluminum or steel, especially stainless steel.

They have the form of pipes or plates. normally water, thermal oil, molten salt or liquid metal are used as heat carrier.

Water jetting that are adjustable in the parameters working pressure.water amount, temperature and nozzle sizes, can achieve outstanding cleaning results.

Special nozzles with water jetting heat exchanger

when you have to remove oil residues it is ideal to use pure water machines up to 2800 bar. when you have to remove hard crust you need more pressure and a more aggressive water jet with special nozzles.

For this reason watex recommends to start with low water pressure and little water amount and then to increase both slowly.

For cleaning heat exchangers Watex offers a wide range of high pressure cleaners with useful accessories. You have questions about the cleaning of heat exchangers?

Deposits and other particles can get lodged in the heat exchanger tubing, reducing the efficiency of heat transfer. Any reduction can result in higher expenditures for the operator.

Use Watex water jetting equipment to keep your heat exchanger running at its full efficiency.

The high-pressure water jet removes scale, rust, residue, and other deposits. The waste is washed away with the water.

Heat exchanger tube with water jetting

Hydro Blasting offers heat exchanger, condenser. evaporator tube cleaning and high pressure water jetting equipments for evaporator tube cleaning, condenser tube cleaning.

Heat exchanger tube cleaning & various pipe cleaning applications.

Watex hydro Blasting offers high pressure hydro jetting system ranging from 100 bar to 2800 bar pressure consisting high pressure reciprocating plunger pump.

There are many advantages of using high pressure hydrojetting equipments over chemical cleaning, brush cleaning and several other conventional methods.
Pump flow rate up to 250 lpm and pressure up to 2800 bar is available. For requirement, please contact National Hydro Blasting.

Water jetting heat exchanger

Crude U-tube heat exchanger cleaning 

Water jetting heat exchanger

Heat exchanger can get clogged up with layers solid deposits easy after many days work . While manual solutions are available, but they are time consuming and cleaning efficiency can’t compare with water jetting pump. Our automatic tools guarantee that operator will liberate the hands. avoiding the impact of high pressure water and control debris within the limited area .

Hydro jetting as powerful cleaning method offers fast and efficient cleaning to provide good results. Water blasting system involves the insertion of a hose into a pipe with two or three cleaning heads.

High pressure water jetting system can clean heat exchanger thoroughly and efficiently. Deposit and other particles can get lodged in the heat exchanger tubing, decrease the efficiency of heat transfer. Any reduction can result in higher expenditures for the operator. Water jetting machine has the ability to keep heat exchanger running at its full efficiency.

Water blasting as the best way for heat exchanger

Heat exchanger, condenser, evaporator tube, pipe cleaning. Till now there is no other method can compare with hydro blasting machine. Watex offers high pressure cleaning machine ranging from 250 bar to 2800 bar pressure for different tube cleaning according to different material. And the flow rate up to 220L/min for big pipe cleaning.

Water jetting heat exchanger

Water jetting have proved the ability to solve impossible cleaning challenges include:

Aluminum tubed furfural heat exchanger cleaning . High pressure water removing tenacious coke scale from the tube involving a sensitive mechanical heat exchanger cleaning with small pressure like 250 bar-2800 bar.

U sharp tube heat exchanger cleaning. Removing hard coke from heat exchangers in a short time compared to the cleaning by traditional method.

Both the inside and outside of heat exchangers have lots of contamination. These are common problem for heat exchanger especially when dealing with hard-to-clean products. When contamination of heat exchanger increases the heat. transfer efficiency decrease and a lot of energy wasted brought by the contamination of the heat exchanger. High pressure water jetting can deal with all the problems.

There are two most popular ways of high pressure water cleaning heat exchangers is done by manually or semi-automatic. Due to fatal dangers of working with high pressure water and the increased legislation on safe working with high pressure water. The high requirement for the safety for the operator have become the big sound for heat exchanger cleaning .

Chosen the right method for heat exchanger is very important

Cleaning heat exchanger tube is core to the functionality of heat exchangers. When they become fouled, the result will be a decrease the efficiency for whole of the unit . This affects flow rate, fluid pressure and heat transfer. It need to clean and maintain them regularly in order to ensure a smooth flow for your heat exchanger operation.

Hydro jetting heat exchanger involves a nozzle assembled on the end of a flexible hose which go insider of the tube to achieve cleaning. High pressure water blasting removes scale, rust, residue, and other deposits either the internal or external surface. The waste is washed away by the high pressure water .

There are several method for heat exchanger cleaning

Water jetting heat exchanger as the traditional method of tube cleaning is exactly the best method. It use high pressure water from a nozzle blasts away debris and fouling.

Mechanical tube cleaning uses projectiles  

Mechanical tube cleaning uses projectiles to clean tubes rather than water jetting. Heat exchanger cleaning by mechanical has grown in popularity with some advancements in maintenance. Some companies also like this ,due to it easy to maintain and increase the safety .

The type of cleaning method depends on the type and hardness of the fouling in your tube. Not only does the mechanical tube cleaning method do a great job at cleaning out fouling. but it’s faster and cheaper than more traditional methods.

High pressure water cleaning heat exchanger

This cleaning methods is one of the mechanical tube washing method. It uses high pressure water from the nozzle at the end of the hose to cleaning through the tube.

Heat exchanger tube cleaning is very important for most of industries

Water jetting heat exchanger as widely used in all of the chemical and thermal process industries across the world for chemical. Petrochemical, oil and gas, food and beverage. and power generating companies. When it comes to tube cleaning, heat exchanger has long been a maintenance problem. Heat exchanger failure will lost output and income.

There are many type of heat exchanger. whether they are plate, pipe, shell or tube heat exchangers that need to be cleaned, We have the right machine can meet their cleaning requirement .

Why adopt high pressure water jetting for heat exchanger cleaning ?

Some people use traditional chemical acid cleaning. brush cleaning. During this kind of conventional method of cleaning, there is also a gradual erosion of tube surface , which reduces the lifespan of heat exchanger tubes.

Comparing with high pressure water jetting technology , all conventional methods are expensive and time consuming. Besides, water blasting tube leaves a smooth surface without disposal of chemicals with more cost .

Experienced, Knowledgable, Trustworthy

Quick and helpful reply within 24 hours;
Tailored solutions provided for your project;
One-stop purchasing service.

error: Content is protected !!